#The keykey rma department mac

This ensures that outgoing traffic will be sent to the LPS-20x LPS-20x configured as their default gateway. Note that to access the management tool wirelessly, the appropriate security setting must be enabled on the Management tool page. Any traffic addressed to the access controller.Should forward traffic to the same access controller. If you are using multiple daisy-chained LPS-20xs, all This includes NetBIOS traffic regardless of its source/destination address.ĭownstream Port Filter (incoming traffic) (This permits local or remote management stations to HTTPS traffic regardless of its source address.Certain address management protocols (ARP, DHCP) regardless of their source address.Any traffic from the access controller.FiltersĪpply only to data being received by the port (incoming traffic). Each port has its own specific set of filters. Traffic is filteredĪs it is received by the upstream, downstream, or wireless ports. The intelligent bridge uses filters to only allow traffic to flow between itself and an access controller. To maintain the security of network logins, the ADC access controller will only accept location-aware informationįrom a LPS-20x that has a matching shared secret to its own. Clear the security filters check box if you are connecting to a wired LAN (refer to

#The keykey rma department mac

(The access controller is configured to do this by default.)Īlternately, you can specify the MAC address of the access controller.ģ. The access controller as the default gateway. If you are using a DHCP server on your network, make sure that it is configured to return the IP address of.If you are using static IP addressing, make sure that you set the default gateway on the LPS-20x to be the.By default, the LPS-20x uses the default gateway as the access controller. On the main menu, click Security and then click Access controller. To configure the connection to the access controller and enable the intelligent bridge, do the following:ġ. This prevents wireless customers fromĪccessing resources on the backbone LAN that interconnects the LPS-20x and the access controller. LPS-20x only allows traffic to flow between itself and the access controller. When the security filters are active, the

Unlike a traditional bridge which automatically forwards all traffic between ports, the LPS-20x features an intelligentīridge which can apply filters to maintain the security of the network. The LPS-20x uses the services of an access controller to manage access to the public access network. However, not all manufacturers support thisĬONFIGURING THE CONNECTION TO THE ACCESS CONTROLLER The Distance Between Access Points option provides the best performanceīenefit when client stations are equipped with wireless adapters that areĬonfigured with the same setting. Reduce the amount of crosstalk between the LPS-20xs.Īnother benefit to using reduced settings is that it will improve roaming performance. However, if you are installing multiple LPS-20xs and theĬhannels available to you do not provide enough separation, then reducing the receiver sensitivity can help you To make the adjustment, open the Wi-Fi page on the Wireless menu.įor most installations, the Large setting should be used. In environments where the number of wireless frequencies are limited, it can be beneficial to adjust the receiver The areas in gray indicate where two cells overlap that are using the same frequency. This stategy can be expanded to cover an even larger area using three channels (Figure 20).įigure 20. However, it is possible to stagger your cells to reduce overlap and increase channel separation (Figure 19).įigure 19 uses only three frequencies across multiple cells (North America). Transmission delays are reduced by using different operating frequencies. In North America, you would create the following installation (Figure 18).